Design and simulation of an automatic room heater control system.
Journal article
Authors / Editors
Research Areas
No matching items found.
Publication Details
Author list: Zungeru AM, Mangwala M, Chuma J, Gaebolae B, Basutli B
Publication year: 2018
Journal: Heliyon (2405-8440)
Journal acronym: Heliyon
Volume number: 4
Issue number: 6
ISSN: 2405-8440
Languages: English-Great Britain (EN-GB)
Abstract
This paper presents the design and simulation of an Automatic Room Heater Control system. This system allows the user to set a desired temperature which is then compared to the room temperature measured by a temperature sensor. With the help of a microcontroller, the system responds by turning ON any of the two (2) loads (Fan or a heater) automatically depending on the temperature difference. The Fan is triggered ON when the room temperature is higher than the set temperature and the heater is triggered ON when the room temperature is lower than the set temperature. The system was designed and simulated using Proteus 8, circuit building software used for building electronics system. Proteus software was used to design and simulate the main circuit, and Micro-C hex file was loaded on the Proteus schematic design. For coding the PIC Microcontroller, Micro-C compiler was used. A 5 V DC power supply was designed in order to provide a biasing voltage to most of the active devices used in the system design circuit. The DC power supply was designed and simulated using Multisim software. The system was simulated and simulation results were in accordance to the design specifications.
Keywords
No matching items found.
Documents
No matching items found.
