Fabrication and characterization of spray pyrolysed inxsy thin films for cuins2 solar cells

Journal article

Authors/Editors

Muiva, Cosmas

Research Areas

ENGINEERING AND TECHNOLOGY (Frascati classification)

Publication Details

Subtitle: Fabrication and characterization of spray pyrolysed inxsy thin films for cuins2 solar cells

Publisher: ACTA Press

Publication year: 2018

Volume number: 2

Issue number: 4

Start page: 22

End page: 28

Number of pages: 7

ISSN: 1078-3466

eISSN: 1710-2243

Abstract

Indium sulphide thin films were prepared at different substrate temperatures and indium to sulphur ratio [In/S] using spray pyrolysis from indium (iii) chloride and thiourea precursor solution. The films were characterised using X-ray diffraction (XRD), optical absorption and electrical measurements. All the films showed preferred orientation along the (220) direction. There was energy gap modification when the indium to sulphur ratio [In/S] was adjusted from 2/3 (2.4 eV) with shift towards higher energy for higher values. The energy gap increased with substrate temperature for films prepared within the temperature range of 483K to 705K. Electrical resistivity measured at 300 K decreased with increasing substrate temperature from 1.16x10
2 Ω cm at 483 K to 1.62 x 10
0 Ω cm at 705 K. In
2S
3 prepared at intermediate temperature showed high potential for use as buffer layers in photovoltaic heterojunction devices.

Keywords

Thin films, In2S3, spray pyrolysis, chalcopyrite solar cells

Documents

No matching items found.